Instruction Manual

LIUDPP000_eng-00 AUTEC
44
8.2 Warnings for the User
The User mu󰘵:
- Observe and comply with all in󰘵ructions and warnings provided by the Machine Manufacturer.
- Observe and comply with all in󰘵ructions and warnings provided by the In󰘵aller.
- Observe and comply with all in󰘵ructions and warnings provided by the Person responsible for
the Machine commissioning or making the Machine available for work.
- Observe and comply with all in󰘵ructions and warnings provided in the Radio Remote Control
Manual.
- Observe and comply with all applicable Laws, Regulations and Standards, even local.
- Operate the Autec Radio Remote Control only in accordance with this Manual and all of its
Parts, and with all Autec warnings and in󰘵ructions, and with applicable Laws, Regulations and
Standards,even local.
- Operate the Machine operated by or through the Autec Radio Remote Control only in
accordance with the Machine Manufacturer’s in󰘵ructions and warnings, and with applicable
Laws, Regulations and Standards, even local.
- Operate the Machine operated by or through the Autec Radio Remote Control only when he is
in a safe condition and can perfectly see the whole Machine's working area.
- Immediately inform his supervisors and/or the people in charge for the working place and/or
for the Machine about any possible failure, damage, loosening, anomalous wear, detachment
and/or any other anomaly that may cause malfunction to the Radio Remote Control and/or to
the Machine, or that may cause damage to people and/or property.
- Keep the Transmitting Unit secure and out of reach of unauthorized and unquali󰘰ed Personnel.
The User mu󰘵 not:
- Use the radio remote control without receiving prior complete training by quali󰘰ed personnel,
and if he does not completely ma󰘵er the in󰘵ructions and warnings regarding the radio remote
control usage
- Use the Radio Remote Control if he suspects malfunction on the Radio Remote Control, the
Machine, or one of their components
- Use the Radio Remote Control if the warnings and labels on the Machine or the symbols on the
Radio Remote Control cannot be read, are worn or dirty
- Allow the use of the Radio Remote Control to unauthorised and/or untrained Personnel.
ADDITIONAL WARNINGS AND INSTRUCTIONS THAT ARE CONTAINED IN THE
OTHER PARTS OF THIS MANUAL MUST BE FOLLOWED.