Instruction Manual

LIUDPP000_eng-00AUTEC
49
9 Maintenance
9.1 Radio Remote Control maintenance - general directions
The Maintenance Technician mu󰘵:
- Observe and comply with all in󰘵ructions and warnings provided by the Machine Manufacturer.
- Observe and comply with all in󰘵ructions and warnings provided by the In󰘵aller.
- Observe and comply with all in󰘵ructions and warnings provided by the Person responsible for
the Machine commissioning or making the Machine available for work.
- Observe and comply with all in󰘵ructions and warnings provided in the Radio Remote Control
Manual.
- Observe and comply with all applicable Laws, Regulations and Standards, even local.
- Operate the Autec Radio Remote Control only in accordance with this Manual and all of its
Parts, and with all Autec warnings and in󰘵ructions, and with applicable Laws, Regulations and
Standards,even local.
- Operate the Machine operated by or through the Autec Radio Remote Control only in
accordance with the Machine Manufacturer’s in󰘵ructions and warnings, and with applicable
Laws, Regulations and Standards, even local.
- Operate the Machine operated by or through the Autec Radio Remote Control only when he is
in a safe condition and can perfectly see the whole Machine's working area.
- Immediately inform his supervisors and/or the people in charge for the working place and/or
for the Machine about any possible failure, damage, loosening, anomalous wear, detachment
and/or any other anomaly that may cause malfunction to the Radio Remote Control and/or to
the Machine, or that may cause damage to people and/or property.
- Keep the Transmitting Unit secure and out of reach of unauthorized and unquali󰘰ed Personnel.
ADDITIONAL WARNINGS AND INSTRUCTIONS THAT ARE CONTAINED IN THE
OTHER PARTS OF THIS MANUAL MUST BE FOLLOWED.
All fine-tuning, checking and maintenance actions carried out on the Radio Remote Control
shall be verified and recorded by the Person in charge of carrying out maintenance on the
Machine.