Instruction Manual
LIUPJQ000_eng-00 AUTEC
20
8.2 START pushbutton
The START pushbutton is used to:
- art the Radio Remote Control (see paragraph 8.8)
- activate the horn when the Radio Remote Control is arted.
8.3 STOP pushbutton
When the STOP pushbutton is activated, the Machine ops and the
Transmitting Unit switches off. To art the Radio Remote Control again
and enable it to control the Machine after the STOP pushbutton has
been pressed, you need to:
- Make sure that the working and usage conditions are safe.
- Pull or turn the STOP pushbutton in the arrow direction (shown on
the button) to unlock it.
- Start the Radio Remote Control following the procedure described in
paragraph 8.8).
The STOP pushbutton should be pressed when it is necessary to op the
Machine immediately whenever a dangerous condition occurs.
The Machine Manufacturer and/or the Inaller mu provide the User with the
inructions and warnings concerning possible risks that may originate from
the Machine op (by way of example: movement inertia, swinging load…).