Instruction Manual

LIUPJQ000_eng-00 AUTEC
24
8.5.3 MOVEMENT SPEED SELECTOR
This switch is used to modify the speed of the Machine movements.
Depending on the configuration:
- It sets two or three speed levels.
- It increases or decreases speed.
The levels and the speed increase and decrease are chosen by the
Machine Manufacturer.
Symbol Meaning
Depending on the configuration, this symbol indicates:
- the normal speed of the Machine movements or
- the increase of speed of the Machine movements.
Depending on the configuration, this symbol indicates:
- the reduced speed of the Machine movements or
- the decrease of speed of the Machine movements.
If this symbol is present, it indicates that the speed of the Machine movements is
further reduced.
8.5.4 Engine on/o󰓐 switch
This switch is used to switch on and off a Machine's engine.
Symbol Meaning
This symbol indicates the power on command of a Machine's engine.
This symbol indicates the switch off command of a Machine's engine.
8.5.5 TAKE command
The TAKE command may be present in the Transmitting Units of a Take & Release Radio
Remote Control. The TAKE command enables to take control of the Receiving Unit, if it is free.