Instruction Manual
LIUPJQ000_eng-00AUTEC
25
8.5.6 RELEASE command
The RELEASE command is present in all the Transmitting Units of a Take & Release Radio
Remote Control. The RELEASE command enables to release the corresponding Receiving
Unit, if it is engaged.
8.6 Low Power function
The LOW POWER function allows transmission at a power lower than the nominal power and
reduces the Radio Remote Control working range (see paragraph "Technical data" in the general
part of the Inruction Manual).
This function aims at:
- Making it easier to work with several Radio Remote Control in the same working environment
(i.e.: many working Machines in the same working area)
- Extending the battery run-time.
This function is eablished by the Machine Manufacturer (see Technical Data Sheet).