Instruction Manual

In addition to the above, Air series' Radio remote controls cannot be installed:
- On Machines that are intended for the use in environments requiring
explosion-proof features or in any usage situation that may pose the
risk of explosion.
- On Machines for moving, raising and transporting people, if the Machine's
characteristics and their related risks and/or the risks related to the
use of a Radio Remote Control do not make it possible for the Machine
Manufacturer to ensure that all the safety requirements are met.
Such requirements must be taken into account when designing and
manufacturing the Machine, also bearing in mind that a Radio Remote
Control will be used. The Machine Manufacturer may allow the installation
and use of the Radio Remote Control on such applications under their
own responsibility.
- On Machines that create or can create dangerous situations if they stop
due to the loss of radio link.
- On Machines that do not allow a risk-free installation of a Radio Remote
Control, due to their functions or features and/or to the risks related to
their use.
- On any kind of lifting accessory (by way of example: magnets, grippers,
suction cups) whenever the loss of radio link or the deactivation of
commands may cause the release of the load, resulting in the risk of
damage to people and/or property. The Machine Manufacturer may allow
the installation and use of the Radio Remote Control for such applications
under their own responsibility.
- If the applicable safety-related laws in the country where the Machine
is used, regulations and standards (even local ones), even concerning
safety in the workplace, do not allow the use of Radio Remote Controls
to control the Machines.
INSTALLATION OF AN AUTEC RADIO REMOTE CONTROL ON MACHINES
AND IN THE ABOVE-MENTIONED SITUATIONS MAY CAUSE SERIOUS INJURY
OR DEATH OR PROPERTY DAMAGE.
AUTEC - AIR SERIES
Installation 25
LIUAIR003_eng-00