Instruction Manual
Please consider that, due to the characteristics of radio propagation (by way
of example: EM interference, out-of-working-range condition), a delay up to
the "Maximum stop time" indicated in the Technical Data (see paragraph 4.3)
may occur from the moment a command in the Transmitting Unit is released
to the moment its corresponding output in the Receiving Unit is deactivated.
The Manufacturer, the Installer, the Owner, the User and/or the Maintenance
Technician, must make sure that these delays never lead to a dangerous
situation in the specic uses.
7.3 Inadvertent activation of commands
The User shall operate with the Transmitting Unit in a correct manner, in accordance with
the instructions for use and maintenance.
If the Unit is used correctly, accidental contact with the User's body parts or
with external bodies does not cause inadvertent activation of the actuators.
Any action carried out on the Transmitting Unit, or on part of it, aiming at
activating the actuators in a dierent way from the one indicated in the
instructions for use constitutes an improper use of the Radio Remote Control.
The User must use the Radio Remote Control in conformity with the
instruction for use and maintenance and with all the Laws, the Regulations
and the Standards, even local, in force in the country where the Radio Remote
Control and the Machine are used; moreover, the User must always have
the control of the Radio Remote Control and remain in the usage position,
as described in the relevant specic part concerning the Transmitting Unit.
The Machine Manufacturer and/or the Installer must assess and adopt
possible additional protection measures for the actuators (by way of example:
commands requiring two-hand operation, “dead-man” function) if particular
environments, equipment and working modes could generate risk situations,
and if Laws, Regulations and Standards in force in the country where the
Radio Remote Control and the Machine are used should require it.
36
LIUAIR003_eng-00
Safety
AUTEC - AIR SERIES