Instruction Manual
7.4 Activation and/or deactivation of commands due to failure
It is possible that a command be activated or deactivated due to electrical
and/or mechanical failure, that may aect the Radio Remote Control and/
or the Machine.
The Machine Manufacturer and/or the Installer of the Radio Remote Control
must carefully evaluate the possible consequences of such malfunction. If
required by the risk assessment, implement protection measures to prevent,
reduce and report potential hazardous situations.
For further information, see paragraph 6.4 .
If a command is activated and/or deactivated due to electrical and/or mechanical failure:
- press the STOP pushbutton to bring the Machine to a safe state,
- disable the Radio Remote Control and stop using the system "Machine+Radio Remote
Control" until the problem has been solved by implementing the necessary technical
operations.
AUTEC - AIR SERIES
Safety 37
LIUAIR003_eng-00