Instruction Manual

8.7 Battery
The Air series' Transmitting Units can only be powered by Autec rechargeable
batteries.
For any warnings and instructions regarding the battery, see "Part E" in
the Instruction Manual.
8.7.1 Battery insertion
Push the battery towards the contacts on the Transmitting Unit (1) and insert it inside the
housing (2).
1
2
The battery slides easily into place and ensures that the positive (+) and negative
(-) poles are correctly connected only if it is inserted with the plate facing its
housing, so that the battery's contacts match the Transmitting Unit's contacts.
8.7.2 Battery removal
Push the battery towards the contacts on the Transmitting Unit (3) and remove it from the
housing (4).
3
4
When the Transmitting Unit is not in use, remove the battery if possible.
AUTEC - Air series
General operating instructions 31
LIULK6ES0_eng-01