Instruction Manual

9 Instructions for the User

The chapter "Instructions for the User" in "Part A" of the Instruction Manual contains the

warnings for the use that add to those provided in this chapter. Therefore, please refer to

that part of the Manual.

The following instructions refer to general usage situations for the LK NEO 6, LK NEO 8 and

LK NEO 6 DF (Model LKN Type LA1CM, DA1DM) Transmitting Unit, and indicate how user

should or should not behave when using the Unit: these do not cover any possible risk situation

and/or drawback that may depend on speci󰘰c applications of Autec Radio Remote Controls.

However, instructions given in the following paragraphs do not replace nor complete the

instructions that must be provided to the User by the Manufacturer of the Machine where an

Autec Radio Remote Control (to which the LK NEO 6, LK NEO 8 and LK NEO 6 DF (Model

LKN Type LA1CM, DA1DM) Transmitting Unit belongs) is installed.

9.1 Usage restrictions

If the Radio Remote Control User wears electronic devices (by way of

example: pacemaker, implantable cardiac de󰄈brillator, hearing aids), the

Transmitting Unit must be kept at least 15 cm away from those devices

when in use.

9.2 User behaviour

Besides the instructions contained in the General Part (Part A) of the Instruction Manual,

when using the LK NEO 6, LK NEO 8 and LK NEO 6 DF (Model LKN Type LA1CM, DA1DM)

Transmitting Unit, the User must:

- observe and comply with all instructions and warnings provided by the Machine

Manufacturer;

- observe and comply with all instructions and warnings provided by the Installer;

- observe and comply with all instructions and warnings provided by the Person responsible

for the Machine commissioning or making the Machine available for work;

- observe and comply with all instructions and warnings provided in the Radio Remote

Control Manual;

- observe and comply with all applicable Laws, Regulations and Standards, even local.

- follow and put into practice the working instructions he received, and/or those he must

be aware of because of his work and his tasks;

- avoid using the Radio Remote Control if he has not been properly trained and prepared,

and if he has not been quali󰘰ed for its use by the Person responsible for the work;

- make sure that the Transmitting Unit and the Receiving Unit are whole and work perfectly;

- make sure that the Machine reacts correctly to the commands activated by the Autec

Radio Remote Control;

LIULK6ES0_eng-01

Instructions for the User

AUTEC - Air series