Instruction Manual

3 Conformity
Addressees of instructions must:
- make sure that the Radio Remote Control works within the frequency band permitted in
the country where it is used;
- make sure that the Radio Remote Control works correctly, in compliance with the applicable
standards in the relevant country;
- not modify the Radio Remote Control conformity, by performing modi󰘰cations or technical
operations that change its operation.
During training on or usage of Autec Radio Remote Controls, local provisions imposing the
conservation of product conformity with local standards must be respected, as well as speci󰘰c
standards related to safety in the use of Radio Remote Controls or electrical devices, both
in the working environment or outside of it.
3.1 EC conformity
According to the regulations in force in the European Union, one of the
requirements for a Radio Remote Control to be compliant with the EC
conformity is to work at one of the permitted frequencies. If it does not, the
Radio Remote Control cannot be considered compliant.
Each Air series' Radio Remote Control working in the frequency band 863-
870MHz complies with the (RED) Directive 2014/53/EU and its essential
requirements.
Each Radio Remote Control also complies with the harmonised standards
listed in the EU Declaration of Conformity, that are in force and applicable
when the Radio Remote Control is put on the market.
Autec Radio Remote Control's EU Declaration of Conformity is provided as
an attachment with the Radio Remote Control.
3.2 FCC/IC conformity
An AIR series' Radio Remote Control working in the 915-928MHz frequency band complies
with the requirements of the following standards:
Unit FCC ID IC Number
AJC Transmitting Unit
Model J4A Type NZ3QH
OQA-J4ANZ3QH 9061A-J4ANZ3QH
LK NEO 6 DF
Transmitting Unit
Model LKN Type DA1LH
OQA-LKNDA1LH 9061A-LKNDA1LH
LK NEO 6/LK NEO 8
Transmitting Unit
Model LKN Type LA1JH
OQA-LKNLA1JH 9061A-LKNLA1JH
12
LIUACFH03_eng-00
Conformity
AUTEC - AIR SERIES