Instruction Manual
4 Frequencies
Air series' Radio Remote Controls can work in two dierent frequency bands: 863-870MHz
or 915-928MHz.
The Radio Remote Controls' working frequency is dened by market-specic laws
and standards. In order for the system “Machine+Radio Remote Control” to be
compliant and therefore to be used, these laws and standards must be respected:
if they are not, the Radio Remote Control cannot and must not be used.
Autec cannot be held responsible if the Radio Remote Control is set with
frequencies that are forbidden in the country of use.
The Radio Remote Control automatically searches for a free working frequency within the
frequency band where it is working.
4.1 863-870MHz frequency band
4.1.1 Frequencies
The radio link between the Units of Autec Air series Radio Remote Controls is established
at one of the frequencies permitted by the European standards in force when the system is
put on the market.
Frequencies used ........................................................................................................ 128
RF power ...................................................................................................... <25mW ERP
Channel spacing ...................................................................................................... 50kHz
Typical working range ................................................................................... 100m (330ft)
The Units of Autec Air series' Radio Remote Controls:
- use a working frequency in the 863-870MHz band,
- check that the frequency is free before using it,
- continually change the working frequency to maintain the radio link even when interference
occurs.
4.1.2 Countries of usage
Air series' Radio Remote Controls working in the 863-870MHz frequency band can be used
within the EU (European Union) and the EFTA (European Free Trade Association).
Check on the technical data plate of the Units in which markets the Radio Remote Control
can be used.
16
LIUACFH03_eng-00
Frequencies
AUTEC - AIR SERIES