User's Manual

AUTEC - Air series
Warnings for installation 11
LIAIRE02-01
3 Warnings for installation
Besides instructions established by the machine's manufacturers, installers must always
observe the following warnings.
3.1 General
Respect and enforce the provisions of all reference standards relevant in
theconcernedapplication󰄈eld(i.e.IEC60204-32forhoistingmachines.)
Always follow the instructions provided in the technical data sheet and
respect values given in the technical data to carry out correct installation.
The electrical connection of the receiving unit must meet the requirements
set by clause 9.1 of standard IEC 60204-1 and/or standard IEC 60204-32.
3.2 Mounting and fastening the receiving unit in the best position
Place the receiving unit so that it can be easily reached in case of need.
Place the receiving unit vertically, with the cable gland or plug facing down.
Fixthereceivingunitinfourpoints,usingthespeci󰄈cholesinthehousing.
Do not perforate the receiving unit in any case.
Wheninstallingonmachinesthatvibrate,itisrecommendedto 󰄈xthe
receiving unit to the machine with the appropriate vibration dampers.