User's Manual
AUTEC - Air series
Warnings for use 17
LIAIRE02-01
4.2 During normal operation
Pay attention to the entire work area. Immediately press the STOP pushbutton
when a hazardous situation occurs.
Visually and directly follow all movements of the machine and its load and
remain inside the radio remote control working range.
Pay particular attention to warnings and visual and acoustic signals, and
take all measurements and steps to avoid that movements of the remote
controlled machine may lead to hazardous situations for people and/or
property.
Incaseofmalfunction,disablethesystem“machine+radioremotecontrol”
until the problem has been completely solved.
Pay attention to low battery signals: all dangerous operations (e.g. hanging
load)mustbeconcludedbeforeitiscompletelyat..
Use the transmitting unit in a simple and comfortable way, avoiding accidental
falls. The pouch, the waist belt and the shoulder harness provided with the
radio remote control are used for that purpose.
4.3 After using the radio remote control
Switch off the transmitting unit when work is stopped or temporarily
interrupted. Do not leave the load hanging (even when charging the unit or
changing the battery).
Never leave the transmitting unit unguarded in order to prevent unauthorised
use.
If an "Key ID 0-1" is in the transmitting unit, always store it in a safe place
each time it is removed. If this key is lost, the radio remote control cannot
work, since the transmitting unit needs the address stored in the key to
work with its receiving unit.