User's Manual

8
LIAIRE02-01
Radio remote control description
AUTEC - Air series
1.8 Identifying the radio remote control
As required by standard IEC 60204-32, each radio remote control is uniquely identi󰘰ed through
a serial number (SERIAL N. or S/N).
The serial number is provided in the identi󰘰cation plate on each radio remote control unit.
This is the only reference to be used both for maintenance operations and for declarations
to competent bodies.
Plates on the units must not be:
- removed from their position (removal will invalidate the guarantee)
- altered or damaged (contact Autec for replacement)