Use and Care Manual

15
In the Code Breaker screen, there are three options to assist user
to understand DTC more: System Description and Quick Check
to read detailed description of DTCs, General Notes to view
helpful repair information of DTCs.
4) To view previous or next DTC in the built-in DTC library, use the
LEFT/RIGHT button.
5) To enter another DTC, press the ESC button to return to previous
screen.
6) To exit to Main Screen, press the ESC button.
3.8 System Setup
The scan tool allows you to make the following adjustments and
settings:
1) Language: Selects the desired language.
2) Work Mode: Sets the I/M readiness working mode.
3) Configure Monitors: Sets the monitors you want to test.
4) Unit of measure: Sets the unit of measure to English or Metric.
5) Key Beep Set: Turns on/off beep.
6) Status Beep Set: Turns on/off the I/M Readiness Status beep.
7) Tool Self-test: Checks if the LCD display, LED lamps and
keyboard are working normally.
8) Update Mode: Accesses the Update Mode.
 Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the Main Screen: Use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Setup, and press the OK button.
Follow the instructions to make adjustments and settings as described
in the above setup options. (Figure 3.3)