User's Manual

12
5) Connect the Pass-Thru device to the PC with the supplied USB
cable, a ―Found New Hardware Wizard‖ window will pop up.
6) Select ―Install the software automatically (Recommended)‖,
click on ―Next‖, and Windows will search for the driver software
automatically.
7) Select the ―MaxiFlash Pro‖ program and click on ―Install‖.
8) When the MaxiFlash Pro device driver program is successfully
installed, you should be able to see the ―Maxi Flash Pro‖ entry in
the Device Manager under ―Maxi Pass Thru Serial‖. (Figure 3.1)
Figure 3.1
NOTE: If the driver installation is not complete or unsuccessful, or
the PC still can’t recognize the device, an Error or Question mark
will display beside the entry icon. Please try installing the driver
program again by clicking the entry, then select start auto searching
for the software, or manually locate the specific file that contains
the driver program.
3.2 Network Configuration
The MaxiFlash Pro device program also provides users with an easy
and convenient application interface for operating network
configurations to ensure proper communication between the Pass-Thru
device and the PC.