User's Manual

13
3.2.1 Ethernet Connection
Using wired network between the Pass-Thru device and the PC, users
can choose either way of connection described as below:
 Connecting to a PC Directly
1. Connect the PC to the Pass-Thru device with the supplied
Ethernet cable.
2. Open ―My Network Places‖ Properties.
3. In the Properties window, under the LAN or High-Speed
Internet heading, right click on the ―Local Area Connection‖
and select ―Properties‖.
4. Now a new window should pop up, titled ―Local Area
Connection Properties‖ Here you need to select the Internet
Protocol (TCP/IP) option, and then click on the ―Properties‖
button.
Figure 3.2
5. Again a new window titled "Internet Protocol (TCP/IP)
Properties" will pop up. In this window, you need to select