User's Manual

"Use the following IP Address" radio button, and set the

specific IP address (take the value shown in Figure 3.3 for

example), then click on ―OK‖.

NOTE: For specific IP address information please contact your

network administrator.

Figure 3.3

6. After all the above properties settings have been properly set,

users can continue on completing the network configuring

procedure, please refer to the detailed operation guidance in

3.2.2. MaxiFlash Configuration – Wired Network.

 Connecting to an Existing LAN

1. Connect the Pass-Thru device to a local network with the

supplied Ethernet Cable.

2. On most LANs, MaxiFlash Pro can obtain its IP address

automatically using DHCP.

3.2.2 MaxiFlash Configuration – Wired Network

1) Connect the Pass-Thru device to the PC or an existing LAN with