User's Manual

the supplied Ethernet cable.

2) Power up the device by the external power supply; verify the

green Power status light on the front panel is on.

3) Verify the Ethernet status lights at the Ethernet port bottom are on.

(One illuminates solid orange, the other flashes green light.)

4) Click on ―All Programs‖ from Windows Start Menu, find the

―Maxi Flash‖ entry under ―Autel intelligent tec inc‖, click on

―MaxiFlashCFG‖, and wait for the program interface to pop up.

(Figure 3.4)

Figure 3.4

[Net: Wire] – Indicates wired network connection between the device

and PC.

[Net: Wireless] – Indicates wireless network connection between the

device and PC.

[Power: Off/On] – Turn On/Off the wireless connection (for wireless

only).

[Mode: DHCP] – Allows automatic network configuring.

[Mode: Manual] – Allows manual network configuring.