User's Manual

5. Software Update

This function allows you to update the Pass-Thru device driver

software through the PC.

 Get Registration Information

The Product Serial No. and Register Password are written in the

device memory; users can get the product registration information

from the PC once the J2534 device has been verified through the

internet.

1. Install the device CD update program.

2. Connect the device to the PC via USB/Ethernet/Wi-Fi.

3. Ensure your PC is connected with the Internet, the device

update program will automatically verify if the device has been

registered or not.

4. If the device is verified as new and has not been registered, a

pop-up window will prompt to show the Product Serial No. and

 Register the Tool

User could update the device software ONLY after you had

registered the tool on our website: www.maxidas.com. Then you

could download software, update online, retrieve information and get

warranty service.

NOTE: Prior to registration, please confirm your network is

working properly.

1. Log on the website www.maxidas.com.

2. Click on the Update tool bar at the top of the screen, and then

select User Register. Or click on the Updates column in the

lower right corner of the screen, and select Register.