User's Manual

4
device’s communication or connection to the Vehicle or PC. Please
refer to Table 1 for detailed description of the status lights.
TABLE 1—STATUS LIGHTS ON THE FRONT PANEL
Light
Description
Power
Illuminates solid green when power-on.
Error
Illuminates solid red when serious hardware failure
occurs. Please call technical supports for assistance.
Note: This status light turns on automatically every
time when the device is power up, which is a normal
self-test procedure, and it will turn off automatically
later when the device starts working normally.
Wireless
Flash green when connected to Wi-Fi network.
Vehicle
Flash green when communicating with the vehicle’s
network.
Note: Do not disconnect while this status light is on! If
you interrupt the flash reprogramming procedure while
the vehicle’s ECU is blank or only partially programmed,
the module may be unrecoverable.
USB
Flash green when the device is properly connected and
communicating with the PC via the USB cable.
2) USB Port
The USB port provides the easiest connection between the device
and the PC via a USB cable, and is used to control the device from
the software application running on the PC.