User's Manual

2.3 Power Up

The Pass-Thru vehicle reprogramming device can be powered either via

the vehicle DLC, or the external power adapter.

 Vehicle Power Supply

1) Connect the MVCI – OBDII cable to the reprogramming tool.

2) Find DLC on vehicle.

A plastic DLC cover may be found for some vehicles and you need

to remove it before plugging the OBDII cable.

3) Plug OBDII cable to the vehicle’s DLC.

4) Wait for the reprogramming tool to power up.

 External DC Power Supply

1) Locate the power port of the device.

2) Connect the device and the power source with the power adapter.

3) Wait for the reprogramming tool to power up.

The external power supply is necessary for off-board

reprogramming, and since this reprogramming tool does not

receive power from the PC’s Ethernet or USB ports, it is also

needed when the device is communicating applications on the PC.

NOTE: The external power supply does not support power charging

to the vehicle battery.

2.4 Specifications

The MaxiFalsh

Pro Reprogramming Device is powerfully featured

to be desired by all OEM customers:

 Supports simultaneous communication definition in J2534-1, running

3 protocols at the same time, which greatly improves reprogramming

and diagnostic speed.