User's Manual

1) From System Setting screen, use the UP/DOWN scroll button

and LEFT/RIGHT scroll button to select Wheels to Test, and

press the Y button.

2) From Wheel to test screen, use the LEFT/RIGHT scroll button

to select All Wheels or One Wheel mode for TPMS sensor

testing. (Figure 3.8)

Figure 3.8

3) Press the Y button to save your selection or the N button to exit

without change.

NOTE: In All Wheels mode, the tool will determine if a

duplicate sensor ID has been read. In this case, the tool will

display a message “Sensor ID Duplicated.” In One Wheel

mode, the tool will not check the duplicate sensor ID.

Distance Unit

1) From System Setting screen, use the UP/DOWN scroll button

and LEFT/RIGHT scroll button to select Distance Unit, and

press the Y button.

2) From Distance Unit screen, use the LEFT/RIGHT scroll button

to select the desired unit of distance: Km or mile. (Figure 3.9)