User's Manual

15
NOTE: When using external power, the scan tool stays on until
you turn it off. When using internal battery power, the scan tool
turns off automatically after a set time of inactivity.
About
This function allows viewing of some important information such as
serial number and software version number of the tool.
1) From System Setting screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select About, and press the
Y button; wait for the About screen to appear.
2) View tool information on screen. (Figure 3.11) Press the N
button to exit.
Figure 3.11
3.9 Product Troubleshooting
This part describes problems that you may encounter while using the
TPMS tool.
Vehicle Linking Error
A communication error occurs if the TPMS tool fails to communicate
with the vehicle’s ECU (Electronic Control Unit) when running the
diagnostic function. You need to do the following to check up:
 Verify that the ignition is ON.
 Check if the TPMS tool’s OBD II connector is securely
connected to the vehicle’s DLC.