User's Manual

32
Figure 4.27
 The saved DTC and sensor data can be reviewed in Review
Data, which supports easy data playback and printing.
D. Erase Codes
1) From the TPMS Diagnosis Menu, use the UP/DOWN scroll
button to select the Erase Codes, and press Y button. (Figure
4.22)
2) The tool will display a warning message for your confirmation.
Press the Y button to continue, or N button to exit. (Figure 4.28)
Figure 4.28
3) If the erase command is sent successfully, the screen will show
as below (Figure 4.29). Press any button to continue. To make
sure codes are erased clearly, run Read Codes again.