User's Manual

19
Figure 3.6 (Without Relearn)
Figure 3.7 (Without Relearn)
The tool will do TPMS test in a sequence of LF (Left Front), RF
(Right Front), RR (Right Rear), LR (Left Rear) and SPARE, if the
vehicle has the option for the spare. Use UP/DOWN or
LEFT/RIGHT scroll button to move to the desired wheel for testing.
Place the tool alongside the valve stem and point toward the sensor
location and then press TEST BUTTON.
Once the first sensor test is completed, the screen will hold for 3
seconds for data viewing and then switch to next sensor test. Follow
the same procedure for the rest of the three or four wheels by pressing
UP/DOWN scroll button and then TEST BUTTON.
The tool will send LF signal to trigger the sensor. Depending on the
sensor type, the tool will activate the sensor on the first or last step.
Once the sensor is successfully activated and decoded, the tool will
display as below with an audible beep. (Figure 3.8)