User's Manual

Figure 3.15

[Pos] – Indicates the wheel sensor position.

[ID-H/D] – Shows sensor ID data.

[KPa/Psi/Bar] – Indicates wheel pressure.

[℃/℉] – Indicates wheel temperature.

[BAT] – Indicates battery condition.

[Mode] – Defines tire sensor working mode or status.

[Modulation] – Indicates sensor signal frequency.

NOTE: Different ID format, pressure and temperature units will

display at the title bar according to the device’s system setting,

please refer to 2.8 System Setting for detailed guidance.

B. Latest Test

This function allows you to review the last tested sensor data and

activate the sensor by using the wave signal of the latest trigger event,

which is very useful for technicians to wake up sensors of the same

vehicle.

1) Use the UP/DOWN scroll button and LEFT/RIGHT scroll

button to select Latest Test from Main Menu (Figure 2.1).

2) A function menu screen with the previously activated sensor

information will show up (Figure 3.16), use the UP/DOWN or

LEFT/RIGHT scroll button to select a scanned wheel, and then