User's Manual

27
4) Press the Y button to delete test records and enter test mode. For
detailed procedure, please refer to section 3.2Vehicle Selection.
5) Press the N button to wake up the scanned wheel while keeping
the previous sensor data, and then use the UP/DOWN or
LEFT/RIGHT scroll button to select the remaining wheels, and
press the TEST BUTTON to reactivate, or press the N button to
exit.
3.2 TPMS Relearn
This function, which provides users with quick access to the vehicle‟s
ECU, supports TPMS Diagnosis for sensor data writing/reading &
DTCs retrieving/clearing, and saves data for later reviews and
printing.
1) Connect the TPMS tool to the vehicle‟s DLC with the OBDII
cable. Press the POWER BUTTON to turn on the tool.
2) Turn the ignition on but do not start the engine.
3) Make sure the testing mode is set to All Wheels mode in
System Setting.
4) Follow the same process in Direct Test to the All Wheel Mode
function menu screen, use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select the Relearn function.
(Figure 3.19)
Figure 3.19