User's Manual

5
4) “ ” -- Indicates USB communication with the computer is
established.
5) “ ” -- Indicates magnet is required when activating TPMS
sensor.
6) “ ”-- Indicates deflation is required when activating TPMS
sensor.
7) “ ” -- Indicates test mode One Wheel of Wheels to Test in
the system setting is selected.
8) “ ” -- Indicates test mode ALL Wheels of Wheels to Test in
the system setting is selected.
9) “ ” – Indicates the TPMS tool is sending signals to the tire
sensor for activation and test.
10) “ ” – Indicates tool communication with the vehicle‟s OBDII
DLC.
2.5 Keyboard
No solvents such as alcohol are allowed to clean the keypad or
display. Use a mild nonabrasive detergent and a soft cotton cloth. Do
not soak the keypad as the keypad is not waterproof.
2.6 Battery Charging
The TPMS tool has a 3.7V built-in Lithium-Ion polymer rechargeable
battery. There are two means of battery charging:
 To charge battery by adapter.
1) Locate the power port of the device.
2) Connect the device and the power source with the adapter.
 To charge battery by USB cable
1) Locate the USB port of the device.