User's Manual

2) Connect the device and the computer with the USB cable.

IMPORTANT: Charge battery in time, otherwise the test results

may be incorrect.

2.7 Power Up by DLC

The tool can also be powered via the vehicle Data Link Connector

(DLC). Just follow the steps below to turn on the TPMS tool:

1) Connect the OBDII Cable to the TPMS tool.

2) Find DLC on vehicle.

A plastic DLC cover may be found for some vehicles and

you need to remove it before plugging the OBDII cable.

3) Plug OBDII cable to the vehicle‟s DLC.

4) Power up the TPMS tool by pressing the Power Button,

and wait for the Main Menu to appear. (Figure 2.1)

Figure 2.1

OBDII connection does not support battery charging.

2.8 System Setting

The tool allows you to make the following adjustments and settings.

1) Language: Selects the desired language.

2) Beep Set: Turns on/off key-press beep.