User's Manual

Diagnostics Operations Operations
50
Reprogramming Operation
Typical reprogramming operations require you to input and validate VIN
number first. Tap the input box and enter the correct number, the programming
interface then displays.
Figure 4-16 Sample Reprogramming Operation Screen
The main section of the reprogramming interface provides you certain
hardware version, and current software versions’ information, as well as the
information of the newest software versions to be programmed to the control
units.
Throughout the programming procedure, a series of on-screen operational
instructions will display to guide you through.
Carefully read the on-screen information and follow the instruction to execute
the programming procedure.
Re-flash Errors
IMPORATANT: When reprogramming onboard, always make sure the vehicle
battery is fully charged and in good working condition. During reprogramming
there is a risk of having the operation failure if voltage falls below the proper
operation voltage. Sometimes a failed operation can be recovered, but there is
a chance that failed reprogramming could ruin the control module. We
recommend connecting an external battery charger to the vehicle to ensure a
successful operation.