User's Manual

Chapter 3Getting Started
16
Flat Adhesive Mount Curved Adhesive Mount
Figure 3-6Attaching adhesive mounts
 Toremove flat or curved adhesive mounts
Use a hair dryer to heat the mount and then remove it.
NOTE: Attach the adhesive mounts at least 24 hours in
advance of use. Follow the requirements below:
Apply to smooth surfaces. Avoid porous or abrasive
surfaces, which will reduce adhesion.
Apply to clean surfaces. Remove heavy dirt, oil, wax or
other debris that will reduce adhesion.
Operate in room temperature. Avoid cold or damp
environment that will reduce adhesion.
3.5 Powering Up
Press once the Power/Mode button. The red Camera
Status Lights flash three times and the Sound Indicator
plays a ringtone.
3.5.1 Screen Layouts
After powering up your camera for the first time, the screen
displays the default video mode as below.