User's Manual Part 1

General Introduction MaxiSys System Display Tablet
7
Item
Description
Operating
Temperature
-10 to 55°C (14 to 131°F)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Housing
Strong plastic housing with protective rubber boot
Dimensions (W x H x D)
270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm
(1.4”)
Weight
NW: 1.10 kg (2.42 lb.) (for 906TS)
Supported
Automotive
Protocols
ISO 9142-2, ISO 14230-2, ISO 15765-4, K-Line,
L-Line, Flashing Code, SAE-J1850 VPW,
SAE-J1850 PWM, CAN ISO 11898, Highspeed,
Middlespeed, Lowspeed and Singlewire CAN, GM
UART, UART Echo Byte Protocol, Honda Diag-H
Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708,
Fault-Tolerant CAN
2.2 VCI – Wireless Diagnostic Interface
The wireless diagnostic interface MaxiVCI V100 is a small vehicle
communication interface (VCI) used to connect to a vehicle’s diagnostic
connector (DLC) and connect with the Display Tablet, as well as standalone
PC, as a vehicle communication interface (VCI) for vehicle data transmission.
2.2.1 Functional Description
Figure 2-4 MaxiVCI V100 Wireless Diagnostic Interface