User's Manual Part 1

55
Chapter 5 TPMS Service Operations
The TPMS application is used to check the TPMS sensor conditions, program the
MX-Sensor, perform the TPMS Relearn procedure and basic TPMS diagnostic
functions.
NOTE: The TPMS service operation is available for MaxiSys MS906TS only.
5.1 Navigation
Tap the TPMS application button from the MaxiSys Job, the Vehicle Menu will
appear. (Figure 5-1) Select the specific vehicle to perform TPMS service.
Figure 5-1 Sample Vehicle Menu Screen
A TPMS icon displays on the Manufacturer button indicating the TPMS service
is available. Detailed description of the buttons, see 4.2.1 Vehicle Menu
Layout on page 23.
After selecting the vehicle brand, the TPMS button on the system Navigation
bar at the bottom of the screen shall display a green tick icon.
5.1.1 TPMS Service Screen Layout
The screens in TPMS service application typically include four sections.