User's Manual Part 1

TPMS Service Operations Check Operations

Table 5-1 Possible results for triggering

Icon

Results

Description

(Green)

Successful

Sensor Read

TPMS sensor is successfully activated and

decoded. The table on the right side of the

screen displays the sensor information.

(Red)

Failed Sensor

Read

If the search period expires and no sensor

is activated or decoded, the sensor may be

mounted incorrectly or cannot function. The

table on the right side of the screen displays

“Failed”.

If a sensor with a duplicate ID has been

read, the screen displays a message

“Sensor ID duplicated”.

In this case, repeat the test procedure.

NOTE: With Ford sensors, the tablet should be held 180 degree away from

the stem. Please refer to the user manual from the vehicle maker.

5.3 Programming Operations

The programming function is used to program the sensor data to the

MX-Sensor and replace the faulty senor (poor battery life or malfunction). The

MaxiSys MS906TS is easy to use with a proven efficiency and guaranteed

accurate results.

There are four options available when programming MX-Sensor using the

Display Tablet: Copy by Activation, Copy by OBD, Auto Create, and Manual

Create.