User's Manual Part 1

TPMS Service Operations Programming Operations
60
Figure 5-4 Sample Programming Function Screen
Main Section
Column 1 – displays wheel positions
Column 2 – displays the new created sensor IDs
Column 3 – displays the retrieved sensor IDs by activation or by OBD
NOTE: Programming function will only work with Autel’s MX-Sensor.
Currently, there are two models available: Clamp-in Sensor and Snap-in
Sensor, both with two types, one in orange color with 433MHz frequency, and
one in dark gray color with 315MHz frequency. The Clamp-in Sensor is taken
as an example in this manual. Please choose the proper MX-Sensor when
programming.
5.3.1 Copy by Activation
This function allows user to bypass OBD II and automatically write in the
retrieved original sensor data to the MX-Sensor. It is used after the original
sensor is triggered.