User's Manual Part 1

TPMS Service Operations Programming Operations

5.3.4 Manual Create

This function allows you to manually enter sensor IDs. You can enter a random

ID or the original sensor ID.

NOTE: Do not enter the same ID for different sensors.

 To manual create

1. Tap the Programming tab.

2. Select the specific wheel on the screen.

3. Tap Manual Create button.

4. Enter the characters in the prompted screen. Tap Done to finish and save

the sensor ID, or No to exit.

NOTE: Sensors from different manufacturers may have different ID character

length limits. The Display Tablet will automatically recognize character length

of the OEM sensor ID, and prevent further input into the textbox when the

limit is reached.

5. Place the proper MX-Sensor near the top right of the Display Tablet and

tap OK to start programming.

NOTE: For some models, if a random ID is entered, please perform Relearn

function after programming is finished; if the original sensor ID is entered,

there is no need to perform Relearn function.

5.4 Relearn Operations

This function allows quick access to the vehicle’s ECU, performing TPMS

diagnostics, reading IDs from vehicle, writing IDs to the vehicle and reading/

clearing codes of tire pressure monitoring system.