User's Manual

Digital Inspection Operations Additional Accessories
101
Accessory Assembly
For 8.5mm Imager Head
The three accessories, including the Magnet, Hook, and Mirror (Figure 16-2),
can be attached to the Imager Head with the same manner described below:
1. Hold the accessory and the imager head.
2. Slip the end of the accessory over the imager head and then fix the
accessory.
For 5.5mm Imager Head
The two accessories, including the Magnet and Mirror (Figure 16-3), can be
attached to the Imager Head with the same manner described below:
1. Hold the accessory and the imager head.