User's Manual

Getting Started Install Computer Software

3.3.1 Printing Operation

This section describes how to receive file from the MaxiSys tablet and perform

printing through the computer:

 To perform printing through the computer

1. Install the PC Link (Printing Services program) to the computer.

2. Make sure the display tablet is connected to the computer network,

either via Wi-Fi or LAN, before printing. See 7.1.3 Printing Setting on

page 71 for more information.

3. Run the Printing Services program on the computer.

4. Tap the Print button on the toolbar displayed in various applications

of the MaxiSys system. A temporary file will be created and sent to

the computer for printing.

5. Click the Printer Server tab on the top of the program interface on

the computer, and wait for the printing file to load.

6. Click the Print button to start printing.

NOTE: Make sure the computer installed with the Printing Services program is

connected to a printer.

Refer to the accompanied user manual for the corresponding VCI device for

detailed information about the operation of the network configuration program

and/or the update agent.