User's Manual

Diagnostics Operations Vehicle Identification
25
B. Manual Vehicle Entry
This mode allows you to manually enter and save specific vehicle information,
such as PCM Part Number, Vehicle Calibration Number, or Tear Tag. This
function enables direct access to the vehicle's ECM and saves your time of
doing step-by-step entry selections.
 To perform Manual Vehicle Entry - take Ford for example
1. Tap the Diagnostics application button from the MaxiSys Job Menu.
The Vehicle Menu displays. (Figure 4-1)
2. Tap the USA or the All button on the top toolbar.
3. Select the Ford button from the vehicle menu.
4. Select Manual Vehicle Entry from the Vehicle Selection Menu.
(Figure 4-4) A series of information screen displays, tap Yes to
continue.
Figure 4-4 Sample Vehicle Selection Menu
5. Select one of the three entries in the option screen - PCM Part
Number, Calibration Number or Tear Tag.
6. Take the PCM Part Number entry for example; you need to fill up
the accurate vehicle information in the input boxes.