User's Manual

Diagnostics Operations Vehicle Identification

Figure 4-5 PCM Part Number Input Screen

7. Tap OK to continue when the input is done. A confirming screen

showing the Vehicle Information displays.

8. Check if the vehicle information is correct, and then from the

confirming screen, select:

a) Yes to continue.

b) No to return to the vehicle selection menu.

9. Select Yes and the vehicle diagnostics screen displays.(Figure 4-2)

C. Auto Vehicle Entry

Some vehicles provide an auto scan feature, which allows you to skip the

step-by-step vehicle identification procedure and retrieve the specific vehicle

information from the vehicle’s ECU directly.

 To perform Auto Vehicle Entry - take Ford for example

1. Tap the Diagnostics application button from the MaxiSys Job

Menu. The Vehicle Menu displays. (Figure 4-1)

2. Tap the USA or the All button on the top toolbar.

3. Select the Ford button from the vehicle menu.

4. Select Start New Session from the vehicle selection menu. A

confirming screen showing the Vehicle Information displays.