User's Manual

Diagnostics Operations Diagnosis

 To change the unit mode, tap the Setting button on the top toolbar

and select a required mode. See 7.1.1 Unit on page 70 for more

information.

3. Display Mode

There are 4 types of display modes available for data viewing, allowing

you to view various types of parameters in the most suitable way for

better data check-ups.

Tapping the drop-down button on the right side of the parameter name

opens a submenu. There are 4 buttons to configure the data display

mode, plus one Help button on the right, tappable when additional

information is available for your reference.

Each parameter item displays the selected mode independently.

Analog Gauge Mode – displays the parameters in form of an analog

meter graph

Text Mode – this is the default mode which displays the parameters in

texts and shows in list format

NOTE: Reading of status parameters, such as a switch reading, which

are mostly in word form, like ON, OFF, ACTIVE, and ABORT, etc., can

only be displayed in Text Mode. Whereas reading of value parameters,

such as a sensor reading, can be displayed in text mode and other graph

modes.

Waveform Graph Mode – displays the parameters in waveform graphs

When displaying this mode, three control buttons will appear on the right

side of the parameter item, allowing you to manipulate the display status.

 Text Button – resumes Text Display Mode

 Scale Button – changes the scale values, which are displayed

below the waveform graph. There are 4 scales available: x1, x2,

x4 and x8.

 Zoom-in Button – tap once to display the selected data graph in

full screen

Digital Gauge Mode– displays the parameters in form of a digital gauge

graph

Full Screen Display – this option is only available in the waveform graph

mode, and mostly used in Graph Merge status for data comparison.

There are three control buttons available on the top right side of the

screen under this mode.