User's Manual

Diagnostics Operations Service
46
Read the information carefully and check the vehicle condition accordingly,
when you are sure that the vehicle is ready to perform the adaptation, simply
follow the instruction provided to make appropriate selections. When the
operation is done, an execution status message such as Completed, Finished
or Successful, displays.
Tap the ESC button to exit the function.
4.7 Service
The Service section is specially designed to provide you quick access to the
vehicle systems for various scheduled service and maintenance performances.
The typical service operation screen is a series of menu driven executive
commands. By following the on-screen instructions to select appropriate
execution options, enter correct values or data, and perform necessary
actions, the system will guide you through the complete performance for
various service operations.
The most commonly performed service functions include:
 Oil Reset Service
 TPMS Programming Service
 EPB Service
 ABS/SRS Services
 SAS Calibration Service
 DPF Regeneration Service
4.7.1 Function Descriptions
This section describes the main functions for vehicle service:
Oil Reset Service
This function allows you to perform reset for the Engine Oil Life system, which
calculates an optimal oil life change interval depend on the vehicle driving
conditions and climate. The Oil Life Reminder must be reset every time the oil
is changed, so the system can calculate when the next oil change is required.
Tire Pressure Monitor System (TPMS) Service
This function allows you to quickly look up the tire sensor IDs from the
vehicle’s ECU, as well as to perform TPMS programming and reset
procedures after tire sensors are replaced.