User's Manual

Diagnostics Operations Programming and Coding

Electric Parking Brake (EPB) Service

This function has a multitude of usages to maintain the electronic braking

system safely and effectively. The applications include deactivating and

activating the brake control system, assisting with brake fluid control, opening

and closing brake pads, and setting brakes after disc or pad replacement, etc.

ABS/SRS Services

This function allows you to perform various bi-directional tests to check the

operating conditions of both the Anti-lock Braking System and the

Supplemental Restraint System, such as Automated Bleeding, Pump Motor

Test, and checking Module information, etc.

Steering Angle Sensor (SAS) Service

This service function allow you to perform calibration for the Steering Angle

Sensor, which permanently stores the current steering wheel position as the

straight-ahead position in the steering angle sensor EEPROM. On successful

completion of the calibration, the steering angle sensor fault memory is

automatically cleared.

DPF Regeneration Service

The Diesel Particulate Filter service function performs the regeneration

procedure which is the DPF cleaning operation to clear the blockage through

continuous burning of the particulate matter captured in the DPF filter. If the

DPF light on the vehicle comes on and you successfully complete a DPF

regeneration cycle, you will notice that the DPF light will automatically turn off.

4.8 Programming and Coding

Since the introduction of OBD II and leading up to modern Hybrids and EVs,

computers and software in cars have been expanding at an exponential rate.

In-car software is becoming one of the leading needs for service, and updating

software may be the only way to fix some of these issues:

 Drivability

 Fuel Efficiency

 Power Loss

 Fault Codes

 Durability of Mechanical Parts