User's Manual

MaxiFix Operations Navigation
63
The MaxiFix interface has 3 main areas:
1. Header Bar – located across the top of the page, is used to select
vehicles and perform keyword searches.
2. Navigation Bar – located along the left-hand side of the page is used to
access the main features of MaxiFix.
3. Main Screen – The center portion of the page presents content based on
the vehicle attributes and keywords selected. The main screen also has
tabs that allow you to switch between functions. Which tabs are available
depend on which function is selected on the Navigation Bar.
Header Bar
The Header Bar, which runs across the top of the page, features:
 A Change Vehicle button to open the vehicle identification window, and
vehicle information bar displaying the active vehicle information, for
example “2013 > Honda > Crosstour > EX”.
 A search field used for entering keywords, codes, or symptoms.
Change Vehicle Button
The “Change Vehicle” button, located on the Header Bar, is used to identify
which vehicle you want to reference on MaxiFix. Vehicle attributes are
selected from a sequence of option lists. Make a selection to advance through
the lists. This data is used to filter searches so that only information that
applies to the identified vehicle is shown.
 To select a vehicle
1. Tap the “Change Vehicle” button on the Header Bar at the top of the
page.
2. Select the year of the vehicle from the list that displays.
3. Select the make of the vehicle from the list that displays.
4. Select the model of the vehicle from the list that displays.
5. Select the submodel of the vehicle from the list that displays.
6. Select the engine of the vehicle from the list that displays.
7. After making a full selection by choosing all vehicle attributes, the
screen refreshes and the selected vehicle is now shown on the
Header Bar.