User's Manual

83
Chapter 10 VCI Manager Operations
This application allows you to pair up the MaxiSys Display Tablet with the VCI device,
either the J2534 Programming Device or the Bluetooth Diagnostic Interface, and to
check the communication status.
Figure 10-1 Sample VCI Manager Screen
1. Connection Mode
Bluetooth Paring – when paired to a Bluetooth device, the connection state
displays as Paired; otherwise it displays as Unpaired.
2. Bluetooth Setting – this section allows you to manage the wireless pairing
operation.
The Bluetooth Setting screen displays the type and a partial serial number for all of
the devices available for pairing. Tap a required device to start pairing. The
Bluetooth status icon displayed to the left of the device name indicates the
received signal strength.
10.1 Bluetooth Pairing
The VCI device needs to be either connected to a vehicle or to an available
power source, so that it is powered up during the synchronization procedure.
Make sure the MaxiSys Display Tablet has a charged battery or is connected
to an AC/DC power supply.