User's Manual

13
Accessories Installation
The two accessories include one magnet and one hook (Fig 3-3). Both are
attached to the imager head in the same manner. Hold the accessory and the
imager head as shown in Fig 3-4. Slip the end of the accessory over the
imager head and then fix the accessory as shown in Fig 3-5.
Micro SD Card Installation
To insert a Micro SD card into the Micro SD card slot, make sure the pins are
facing away from the screen. To remove the Micro SD card, gently push the
Micro SD card inward and then release to eject it from the card slot.
NOTE
Micro SD card slot provides for additional memory, but Micro SD card is
optional and not included. Different Micro SD cards can be used to insert into
the Micro SD card slot. The maximum 32GB of the Micro SD card can be
supported.
Figure 3-3 Accessories
Figure 3-2
Figure 3-4
Figure 3-5