User's Manual

25
They are front camera, side camera, dual camera, rear camera from left to
right. For the dual camera mode, tap the secondary window on the right
bottom to switch live images of the two cameras on the main window for better
view.
⑤ Rotate
Tap this button to control the direction of the real-time image. The real-time
image will do a 90
o
clockwise rotation for each tap of the icon. In dual camera
mode, there is a main Rotate icon for the main window and a small Rotate
icon for the secondary window so that you can choose to rotate the image
you want by tapping the corresponding Rotate icon.
⑥ Settings
Tap this button to entering the setting interface. See chapter 6 for details.
Adjusting LED Light Brightness
To adjust the two LEDs’ light intensity on the cable, press the Dimmer button
or the Brighter button on the handle to decrease or increase the brightness.
This can also be achieved by tapping the middle of the LCD screen and
sliding the two LED Light icons on the two brightness indicator bars with the
left one for the front camera and the right for the side camera. The higher the
icon is, the brighter the LED will be.
Operation Precautions
 Use the tool only as directed. Do not operate the tool unless the user
manual has been read thoroughly and proper training has been
completed.
 The display unit is not waterproof. The imager heads and cable are
waterproof, but not acid-proof or fireproof. Avoid submersing the imager
heads and cable into corrosive, oily places and be sure to keep the
imager heads and cable away from high temperature objects.
 Do not immerse the tool and display unit in water. Such measures
increase the risk of electric shock and damage.