User's Manual

26
 Do not use excessive force to insert or withdraw the imager heads and
cable. This may result in damage to the tool or inspection area.
 Do not use the imager heads and cable to modify surroundings, clear
pathways or clogged areas.
 Do not place the imager heads and cable into anything or anywhere that
may contain a live electric charge or moving parts, which increases the
risk of electric shock or entanglement injuries.
 Do not use the tool for personal inspection or medical use in any way.
This is not a medical tool.
 Do not eat or smoke while operating the tool. Use warm, soapy water to
wash hands and other body parts exposed to drain contents after using
the tool to inspect drains and other areas that may contain chemicals or
bacteria, which will help prevent contamination with toxic or infectious
material.
 When the inspection is completed, carefully withdraw the imager heads
and cable from inspection area.
 Store idle components out of the reach of children and other untrained
persons.
 Maintain the tool with care. Properly maintained tools are less likely to
cause injury.
 Do not drop the tool, if the tool is dropped accidently, check for the
breakage and any other conditions that may affect its operation.
 Use only accessories that are recommended by the manufacturer for the
tool.
 Dry your hands when operating the tool or charging the battery.
 Always use appropriate personal protective equipment while handling
and using the tool. Appropriate personal protective equipment usually
includes safety glasses and gloves, and may include latex or rubber
gloves, face shields, goggles, protective clothing, respirators and steel
toed footwear.
 Protect against excessive heat. The tool should be kept away from heat
sources such as radiators, stoves or others that produce heat. Do not
use the tool near moving machinery or areas where the temperature will
exceed 45°C (113°F).